Fiber Type Options

Fiber Type Options

G.657.A1 – Bend-Insensitive Single-Mode Fiber

G.657.A1 is a bend-insensitive single-mode fiber designed to provide better resistance to bending loss than conventional G.652.D fiber.

According to ITU-T G.657, G.657.A1 fiber is suitable for a minimum design bending radius of approximately 10 mm. It is also compliant with G.652.D transmission and interconnection characteristics, making it highly compatible with existing single-mode fiber networks.


Typical applications:

  • FTTH networks

  • Indoor fiber cabling

  • Fiber distribution boxes

  • Communication equipment

  • Applications requiring moderate bending resistance

G.657.A2 – Enhanced Bend-Insensitive Single-Mode Fiber

G.657.A2 provides stronger bending resistance than G.657.A1 and is recommended where the fiber may need to pass through smaller spaces or tighter routing paths.

Its recommended minimum design bending radius is approximately 7.5 mm, compared with approximately 10 mm for G.657.A1. Like G.657.A1, Category A fiber is compatible with G.652.D networks.


At the same 10 mm bending radius and 1550 nm wavelength, the maximum specified macrobending loss is approximately:

  • G.657.A1: 0.75 dB / turn

  • G.657.A2: 0.10 dB / turn

This makes G.657.A2 particularly suitable for installations where the fiber is frequently routed, coiled, or bent in confined spaces.


Typical applications:

  • FTTH drop cables

  • High-density fiber distribution

  • Equipment enclosures

  • Fiber reels and compact storage systems

  • Indoor communication systems

  • Applications with tighter installation space


Previous:No more content
Next:No more content